BABSL
Design
Pressure-resistant type for use without backup ring in pressurised units such as hydraulic pumps and motors as well as hydrodynamic couplings. With additional dust lip to protect against exterior soiling.
- Used preferably in pressurised units
- Reliable sealing of the housing bore, even with increased roughness of the bore, thermal expansion and split housings.
- Advantages when sealing low viscosity and gaseous media
- Additional dust lip as additional seal against moderate to medium dust and dirt ingress from outside.
- Small axial dimensions (Note: can lead to temperature increase from frictional heat)
For detailed product data and additional information about our BABSL seals, click here to download a copy of our BABSL product data sheet (PDF - 369kb).
Material
- Outer casing: elastomer
- Short, flexible, spring-loaded sealing lip
- Additional dust lip
- Sealing lip profile, sealing lip machined on the front face
- Sealing lip profile, finished sealing lip
- Refer to material type of each product in table below (Alt Reference column shows material - FKM or NBR)
Application
Oil seal applications, including:
- Mechanical power transmissions
- Hydrostatic and hydraulic drives
- Pumps and motors
- Engines
Fluids
- Mineral oils, synthetic oils